Wireless troubleshooting



Follow these steps:

  • Make sure the green LED is lit when the receiver power is turns on. If the LED is not on, check your power supply to the receiver.
  • With the receiver powered up, make sure the red LED comes on when the buttons are depressed on the Transmitter. If the red LED does not come on, the receiver is not getting a signal from the transmitter. If the battery in the transmitter is more than 2 years old check battery voltage with a meter or replace battery.
  • After completing the above steps and the unit still will not function, follow the procedure, Set-up of Transmitter to Receiver Address.
  • If the unit still will not operate. Check connections to the component that the unit is trying to activate using a voltmeter.

Click below for installation manual download. 




Copyright, New World Industries Inc., 2008